Service Charges |
Price Range |
Per Man Hour |
$50 |
Per Man and Machine Hour |
$85 |
Minumum Charge per Gun |
$50 |
Clean Customer Gun |
Consisting of complete disassembly, cleaning all parts, inspection of wear and recommendations to customer of necessary repairs |
$60 |
General Action, Barrel and Rifle Work |
Test-Fire Customer Gun
(Does not include the cost of ammo)
|
$40 |
Remove Fired Case from Chamber |
$60 |
Remove Live Round from Chamber |
$75 |
Remove Obstruction from Bore |
$60 |
Remove Fouling from Barrel |
Time and Materials |
Check Head space |
$35 |
Check Firing Pin Protrusion |
$20 |
Make Chamber Cast |
$40 |
Lap Barrel |
$80 |
Straighten/Adjust Barrel |
$70 |
Install Barrel Liner
(Not including cost of liner) |
$100-200 |
Cut and Crown Barrel |
Handgun |
$50 |
Rifles and Shotguns |
$50-100 |
|
Chamber and Fit Barrel to Action
(Does not include the cost of the barrel, action, polishing, bluing) |
$150+ |
Install Pre-Threaded and Chambered Barrel
(Not including polishing and bluing) |
$110 |
Install Muzzle Brake |
$100+ |
Welding on New Bolt Handle |
$80 |
Forging Bolt Handle |
$90 |
Make and Install Spring |
Flat Spring |
$80 |
V Spring |
$80 |
|
Safety Installation |
Dakota Gentry Mod 70 type safety w/shroud |
$125 |
Mark II/Beuhler type |
$45 |
Chapman Swing Safety Lever |
$45 |
|
Trigger (Installation or Adjustment) |
Shilen, Timney, Dayton-Traister, Moyer |
$60 |
Double-Set, Single Set |
$100 |
|
Recontour Front or Rear Receiver Ring |
$100 |
Install Barrel Band Swivel |
$60 |
Pistol Work |
Revolver Action Job
(Clean, smooth action not including replacement parts) |
$100 |
Semi-Auto Pistol Action Job
(Clean, smooth action, not including replacement of parts) |
$110 |
Chamfer Revolver Barrel |
$40 |
Chamfer Revolver Cylinder |
$50 |
Rebarrel Revolver
Remove old barrel, replace with new factory barrel, labor only) |
$80 |
Straighten Crane on Revolver |
$45 |
Install Crane Lock |
$45 |
Polish Chamber/Bore |
$50 |
Back-Boring (Per barrel, non-plated bores) |
$95 |
Make New Hinge Pin |
$90-150 |
Sight Work |
Sight in Customer Gun (ammo and targets extra) |
$50 |
Bore Sightings on Customer Gun |
$30 |
Pattern Shotgun (ammo and targets extra) |
$50 |
Drill and Tap Barrel or Receiver for Sights (per hole) |
$50 |
Install Receiver Sights |
$40 |
Scope Mounting |
Gun Drilled and Tapped |
$35 |
Gun not Drilled and Tapped (also see per hole) |
$50-75 |
|
Cut Dovetail in Barrel |
$45 |
Install Front Sight Ramp |
Sweat on Type |
$50 |
Screw-on Type |
$40 |
Band Type |
$80-100 |
|
Install Insert in Pistol Sight |
$45 |
Buildup or Construct Extra Hight Pistol Front Sight |
$50-75 |
Install Target Rib Sight on Pistol |
$40 |
Install Front or Mid-Rib Bead on Shotgun |
$35 |
Plug Hole and Re-Drill or Bead on Shotgun |
$60 |
Premium Finishes |
Hot Salt Bluing (Oxynate 7)
Matte Finish
Master Finish
Stainless Steel Bluing (Oxynate 84)
Slow Rust Bluing
Fire Blue (Nitre
Color Case Hardening
Nickel Plating
French Gray
High Polish
Stripping Nickel (removal of old nickel)
Silver Plating
Gold Plating
Parkerizing
Anodizing
Draw-Filing
Jeweling
Wood Checkering
|
Finishes are priced on a per gun basis as complete restorations starting at $600. Please contact us for details and estimates. |